{"id":1427,"date":"2021-12-18T00:38:23","date_gmt":"2021-12-18T00:38:23","guid":{"rendered":"https:\/\/picockpit.com\/raspberry-pi\/?p=1427"},"modified":"2023-08-29T12:29:46","modified_gmt":"2023-08-29T12:29:46","slug":"the-big-raspberry-pi-zero-2-w-troubleshooting-guide","status":"publish","type":"post","link":"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/","title":{"rendered":"The big Raspberry Pi Zero 2 W Troubleshooting guide"},"content":{"rendered":"\n\n\n<h2 class=\"wp-block-heading\">Raspberry Pi Zero 2 showing blank or rainbow screen and no LED&nbsp;<\/h2>\n\n\n\n<p>If you\u2019ve ensured that your Raspberry Pi has power but are not seeing anything on the screen and\/or you don\u2019t see the green LED, it means that there\u2019s something wrong with your SD card.<\/p>\n\n\n\n<p>It could be that it isn\u2019t inserted, it could be that the operating system\u2019s image is corrupted or not compatible. It could also be that the microSD card is broken.<\/p>\n\n\n\n<p>If you\u2019re using an older Raspberry Pi OS image, that could cause problems too, even if it worked on another Raspberry Pi.<\/p>\n\n\n\n<p>Finally, sometimes you need to switch on your monitor first before your Pi Zero 2.&nbsp;<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Why am I getting 640&#215;480 resolution?<\/h2>\n\n\n\n<p>If the operating system cannot determine what resolution your display is capable of, it will go into failsafe mode. Either change it in the OS, or turn on your screen before starting your Raspberry Pi Zero 2 W.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Chromium hangs frequently<\/h2>\n\n\n\n<p>There&#8217;s one fix that you can do to significantly improve your load times and reduce hangs when running Chromium on your Raspberry Pi Zero 2 W.<\/p>\n\n\n\n<p>It involves increasing the size of the swap file from the default 100MB to 2GB.<\/p>\n\n\n\n<p>I tested it on picockpit.com and I saw load times go from 45 seconds to 16 seconds by increasing the swap size.<\/p>\n\n\n\n<p>It&#8217;s easy.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Open <strong>Terminal<\/strong><\/li>\n\n\n\n<li>Type in <strong>sudo dphys-swapfile swapoff<\/strong><\/li>\n\n\n\n<li>Type in <strong>sudo nano \/etc\/dphys-swapfile<\/strong><\/li>\n\n\n\n<li>Go to the line that says <strong>CONF_SWAPSIZE=100 <\/strong>and change &#8220;100&#8221; it to <strong>2048<\/strong><\/li>\n\n\n\n<li>Save the file by pressing <strong>CTRL + O<\/strong>, enter, and then exit by pressing <strong>CTRL + X<\/strong><\/li>\n\n\n\n<li>Type in <strong>sudo dphys-swapfile setup<\/strong>. This will take a while<\/li>\n\n\n\n<li>Type in <strong>sudo dphys-swapfile swapon<\/strong><\/li>\n\n\n\n<li>Open Chromium and test<\/li>\n<\/ul>\n\n\n\n<p>There are some downsides to this and which we cover in our <a href=\"https:\/\/picockpit.com\/raspberry-pi\/everything-about-raspberry-pi-zero-2-w\/#swap-file\">Pi Zero 2 W mega article<\/a>.<\/p>\n\n\n\n<p>Furthermore, I managed to get it just a bit faster by disabling JavaScript and images.<\/p>\n\n\n\n<p>Here&#8217;s how:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>In Chromium, go to your Settings menu by entering <strong>chrome:\/\/settings\/<\/strong> into the address bar.<\/li>\n\n\n\n<li>Then, go to <strong>Privacy and security<\/strong> on the left sidebar.<\/li>\n\n\n\n<li>Click on <strong>Site Settings<\/strong><\/li>\n\n\n\n<li>Then, scroll to the <strong>Content<\/strong> section. You will see <strong>JavaScript <\/strong>and <strong>Images<\/strong>. Click on those and disable them.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Camera problems on the Pi Zero 2<\/h2>\n\n\n\n<p>The Raspberry Pi Zero 2 W has a few things that you have to take note if you are using a camera.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Workaround needed to enable camera on Raspberry Pi OS Bullseye<\/h3>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"657\" height=\"446\" src=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-glamor.jpg\" alt=\"pi zero 2 enable glamor for camera\" class=\"wp-image-1428\" srcset=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-glamor.jpg 657w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-glamor-300x204.jpg 300w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-glamor-18x12.jpg 18w\" sizes=\"auto, (max-width: 657px) 100vw, 657px\" \/><\/figure>\n<\/div>\n\n\n<p>When I first installed the camera, I was eager to try out the camera, but unfortunately, libcamera just showed a black screen as if the camera wasn\u2019t connected.&nbsp;<\/p>\n\n\n\n<p>Libcamera also threw an error: \u201cfailed to import fd\u201d. As of Nov. 2021, <a href=\"https:\/\/forums.raspberrypi.com\/viewtopic.php?t=323547\">this issue is known to Raspberry Pi engineers<\/a>, who issued a workaround,<\/p>\n\n\n\n<p>\u201cA workaround is to open a terminal, <strong>run &#8220;sudo raspi-config&#8221;<\/strong>, <strong>navigate to &#8220;Advanced Options&#8221;<\/strong> and <strong>enable &#8220;Glamor&#8221; graphic acceleration<\/strong>. Then <strong>reboot<\/strong> your Pi.\u201d<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Smaller camera connector<\/h3>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"630\" src=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-pi-4-csi-connector-1024x630.jpg\" alt=\"pi zero 2 pi 4 csi connector\" class=\"wp-image-1430\" srcset=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-pi-4-csi-connector-1024x630.jpg 1024w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-pi-4-csi-connector-300x185.jpg 300w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-pi-4-csi-connector-768x473.jpg 768w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-pi-4-csi-connector-18x12.jpg 18w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-pi-4-csi-connector.jpg 1032w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/div>\n\n\n<p>The larger Pi Zero 2 W uses a slightly smaller cable than the larger Pis.<\/p>\n\n\n\n<p>So, if you are buying a camera module, make sure your kit includes the ribbon for the Raspberry Pi Zero.<\/p>\n\n\n\n<p>If your camera is missing the smaller cable for the Raspberry Pi Zero, <a href=\"https:\/\/buyzero.de\/products\/raspberry-pi-kamera-pi-zero-adapter-kabel?_pos=34&amp;_sid=c950ee2da&amp;_ss=r\">then buy one here.<\/a><\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"768\" src=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-csi-connector-1024x768.jpg\" alt=\"pi zero 2 csi connector comparison\" class=\"wp-image-1429\" srcset=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-csi-connector-1024x768.jpg 1024w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-csi-connector-300x225.jpg 300w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-csi-connector-768x576.jpg 768w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-csi-connector-16x12.jpg 16w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-csi-connector.jpg 1032w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/div>\n\n\n<h3 class=\"wp-block-heading\">No raspistill or raspivideo, use libcamera instead<\/h3>\n\n\n\n<p>Some older guides will point you to use raspistill or raspivideo to interact with the camera.<\/p>\n\n\n\n<p>In Bullseye, both have been deprecated and are no longer included by default.<\/p>\n\n\n\n<p>The replacement is libcamera. You can test libcamera by running <strong>libcamera-hello<\/strong>.<\/p>\n\n\n\n<p>You can see more commands in<a href=\"https:\/\/www.raspberrypi.com\/documentation\/accessories\/camera.html#libcamera-jpeg\"> the official Raspberry Pi Documentation.<\/a><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Command <em>tvservice <\/em>throws error<\/h2>\n\n\n\n<p>If you try to run <strong>tvservice <\/strong>on the Raspberry Pi Zero 2 W, it will throw an error, like below:<\/p>\n\n\n\n<div class=\"wp-block-kevinbatdorf-code-block-pro\" data-code-block-pro-font-family=\"Code-Pro-JetBrains-Mono\" style=\"font-size:.875rem;font-family:Code-Pro-JetBrains-Mono,ui-monospace,SFMono-Regular,Menlo,Monaco,Consolas,monospace;line-height:1.25rem\"><span style=\"display:block;padding:16px 0 0 16px;margin-bottom:-1px;width:100%;text-align:left;background-color:#2e3440ff\"><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"54\" height=\"14\" viewBox=\"0 0 54 14\"><g fill=\"none\" fill-rule=\"evenodd\" transform=\"translate(1 1)\"><circle cx=\"6\" cy=\"6\" r=\"6\" fill=\"#FF5F56\" stroke=\"#E0443E\" stroke-width=\".5\"><\/circle><circle cx=\"26\" cy=\"6\" r=\"6\" fill=\"#FFBD2E\" stroke=\"#DEA123\" stroke-width=\".5\"><\/circle><circle cx=\"46\" cy=\"6\" r=\"6\" fill=\"#27C93F\" stroke=\"#1AAB29\" stroke-width=\".5\"><\/circle><\/g><\/svg><\/span><span role=\"button\" tabindex=\"0\" data-code=\"\/usr\/bin\/tvservice -o\n\/usr\/bin\/tvservice is not supported when using the vc4-kms-v3d driver.\nSimilar features are available with standard linux tools\nsuch as modetest from libdrm-tests.\" style=\"color:#d8dee9ff;display:none\" aria-label=\"Copy\" class=\"code-block-pro-copy-button\"><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" style=\"width:24px;height:24px\" fill=\"none\" viewBox=\"0 0 24 24\" stroke=\"currentColor\" stroke-width=\"2\"><path class=\"with-check\" stroke-linecap=\"round\" stroke-linejoin=\"round\" d=\"M9 5H7a2 2 0 00-2 2v12a2 2 0 002 2h10a2 2 0 002-2V7a2 2 0 00-2-2h-2M9 5a2 2 0 002 2h2a2 2 0 002-2M9 5a2 2 0 012-2h2a2 2 0 012 2m-6 9l2 2 4-4\"><\/path><path class=\"without-check\" stroke-linecap=\"round\" stroke-linejoin=\"round\" d=\"M9 5H7a2 2 0 00-2 2v12a2 2 0 002 2h10a2 2 0 002-2V7a2 2 0 00-2-2h-2M9 5a2 2 0 002 2h2a2 2 0 002-2M9 5a2 2 0 012-2h2a2 2 0 012 2\"><\/path><\/svg><\/span><pre class=\"shiki nord\" style=\"background-color: #2e3440ff\" tabindex=\"0\"><code><span class=\"line\"><span style=\"color: #81A1C1\">\/<\/span><span style=\"color: #D8DEE9\">usr<\/span><span style=\"color: #81A1C1\">\/<\/span><span style=\"color: #D8DEE9\">bin<\/span><span style=\"color: #81A1C1\">\/<\/span><span style=\"color: #D8DEE9\">tvservice<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #81A1C1\">-<\/span><span style=\"color: #D8DEE9\">o<\/span><\/span>\n<span class=\"line\"><span style=\"color: #81A1C1\">\/<\/span><span style=\"color: #D8DEE9\">usr<\/span><span style=\"color: #81A1C1\">\/<\/span><span style=\"color: #D8DEE9\">bin<\/span><span style=\"color: #81A1C1\">\/<\/span><span style=\"color: #D8DEE9\">tvservice<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">is<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">not<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">supported<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">when<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">using<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">the<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">vc4<\/span><span style=\"color: #81A1C1\">-<\/span><span style=\"color: #D8DEE9\">kms<\/span><span style=\"color: #81A1C1\">-<\/span><span style=\"color: #D8DEE9\">v3d<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">driver<\/span><span style=\"color: #ECEFF4\">.<\/span><\/span>\n<span class=\"line\"><span style=\"color: #D8DEE9\">Similar<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">features<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">are<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">available<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #81A1C1\">with<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">standard<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">linux<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">tools<\/span><\/span>\n<span class=\"line\"><span style=\"color: #D8DEE9\">such<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #81A1C1\">as<\/span><span style=\"color: #D8DEE9FF\"> modetest from libdrm<\/span><span style=\"color: #81A1C1\">-<\/span><span style=\"color: #D8DEE9\">tests<\/span><span style=\"color: #ECEFF4\">.<\/span><\/span><\/code><\/pre><\/div>\n\n\n\n<p>The way to resolve this is to use the Legacy graphics driver.<\/p>\n\n\n\n<p>Open a terminal, run <strong>sudo raspi-config<\/strong> and then go to <strong><strong>Advanced Options -&gt; GL Driver -&gt; Legacy<\/strong>.<\/strong><\/p>\n\n\n\n<p><strong>tvservice <\/strong>will work now.<\/p>\n\n\n\n<p>Are you looking to turn off your HDMI? <a href=\"https:\/\/picockpit.com\/raspberry-pi\/raspberry-pi-zero-2-battery\/\">We have a more complete guide here.<\/a><\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"motioneyeos\">How to get motionEyeOS working on Raspberry Pi Zero 2 W<\/h2>\n\n\n\n<p>The latest official version of the motionEyeOS does not work on the Pi Zero 2 W but you can <a href=\"https:\/\/github.com\/jawsper\/motioneyeos\/releases\">use a fork by jawsper which works on the Pi Zero 2 W.<\/a><\/p>\n\n\n\n<p>Here&#8217;s the process, until such a time where we get an official motionEyeOS release that supports the Pi Zero 2. I used the 20220119-dev release and it worked fine following these steps.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What you will need:<\/h3>\n\n\n\n<p><strong>Hardware<\/strong><\/p>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-9d6595d7 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2022\/01\/zerocam-edited.jpg\" alt=\"pi zero 2 camera\" class=\"wp-image-1634\" style=\"width:250px;height:157px\" width=\"250\" height=\"157\" srcset=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2022\/01\/zerocam-edited.jpg 500w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2022\/01\/zerocam-edited-300x188.jpg 300w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2022\/01\/zerocam-edited-18x12.jpg 18w\" sizes=\"auto, (max-width: 250px) 100vw, 250px\" \/><\/figure>\n<\/div><\/div>\n\n\n\n<div class=\"wp-block-column is-vertically-aligned-center is-layout-flow wp-block-column-is-layout-flow\">\n<p><strong><a href=\"https:\/\/buyzero.de\/products\/zerocam-camera-for-raspberry-pi-zero?_pos=1&amp;_sid=9d7b61947&amp;_ss=r\">ZeroCam<\/a><\/strong><\/p>\n<\/div>\n<\/div>\n\n\n\n<div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-9d6595d7 wp-block-columns-is-layout-flex\">\n<div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"><div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-adapter-cable-csi-camera.png\" alt=\"pi zero adapter cable csi camera\" class=\"wp-image-1635\" style=\"width:217px;height:217px\" width=\"217\" height=\"217\" srcset=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-adapter-cable-csi-camera.png 600w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-adapter-cable-csi-camera-300x300.png 300w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-adapter-cable-csi-camera-150x150.png 150w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-adapter-cable-csi-camera-12x12.png 12w\" sizes=\"auto, (max-width: 217px) 100vw, 217px\" \/><\/figure>\n<\/div><\/div>\n\n\n\n<div class=\"wp-block-column is-vertically-aligned-center is-layout-flow wp-block-column-is-layout-flow\">\n<p><strong><a href=\"https:\/\/buyzero.de\/products\/raspberry-pi-kamera-pi-zero-adapter-kabel?_pos=36&amp;_sid=dac20272f&amp;_ss=r\">Adapter cable for Zero form factor<\/a><\/strong><br>(if you have some other camera that didn&#8217;t come with the Zero adapter cable)<\/p>\n<\/div>\n<\/div>\n\n\n\n<p><strong>Software<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><a href=\"https:\/\/notepad-plus-plus.org\/downloads\/v8.2.1\/\" rel=\"nofollow\">Notepad++<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.balena.io\/etcher\/\">balenaEtcher<\/a><\/li>\n<\/ul>\n\n\n\n<p>Download the latest release of motionEyeOS from this <a href=\"https:\/\/github.com\/jawsper\/motioneyeos\/releases\">link<\/a>.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"441\" src=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2022\/01\/image-6-1024x441.png\" alt=\"pi zero 2 w motioneyeos jawsper release\" class=\"wp-image-1627\" srcset=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2022\/01\/image-6-1024x441.png 1024w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2022\/01\/image-6-300x129.png 300w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2022\/01\/image-6-768x331.png 768w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2022\/01\/image-6-18x8.png 18w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2022\/01\/image-6.png 1537w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p>Flash the image file (<strong>motioneyeos-raspberrypi3.img.gz<\/strong>) onto an SD card. I used <a href=\"https:\/\/www.balena.io\/etcher\/\" rel=\"nofollow\">balenaEtcher<\/a>.<\/p>\n\n\n\n<p>If you booted motionEyeOS now, you will see this error: <\/p>\n\n\n\n<div class=\"wp-block-kevinbatdorf-code-block-pro\" data-code-block-pro-font-family=\"Code-Pro-JetBrains-Mono\" style=\"font-size:.875rem;font-family:Code-Pro-JetBrains-Mono,ui-monospace,SFMono-Regular,Menlo,Monaco,Consolas,monospace;line-height:1.25rem\"><span style=\"display:block;padding:16px 0 0 16px;margin-bottom:-1px;width:100%;text-align:left;background-color:#2e3440ff\"><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"54\" height=\"14\" viewBox=\"0 0 54 14\"><g fill=\"none\" fill-rule=\"evenodd\" transform=\"translate(1 1)\"><circle cx=\"6\" cy=\"6\" r=\"6\" fill=\"#FF5F56\" stroke=\"#E0443E\" stroke-width=\".5\"><\/circle><circle cx=\"26\" cy=\"6\" r=\"6\" fill=\"#FFBD2E\" stroke=\"#DEA123\" stroke-width=\".5\"><\/circle><circle cx=\"46\" cy=\"6\" r=\"6\" fill=\"#27C93F\" stroke=\"#1AAB29\" stroke-width=\".5\"><\/circle><\/g><\/svg><\/span><span role=\"button\" tabindex=\"0\" data-code=\"Configuring wired network: no device\nPanic: rebooting in 100 seconds (caused by network)\" style=\"color:#d8dee9ff;display:none\" aria-label=\"Copy\" class=\"code-block-pro-copy-button\"><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" style=\"width:24px;height:24px\" fill=\"none\" viewBox=\"0 0 24 24\" stroke=\"currentColor\" stroke-width=\"2\"><path class=\"with-check\" stroke-linecap=\"round\" stroke-linejoin=\"round\" d=\"M9 5H7a2 2 0 00-2 2v12a2 2 0 002 2h10a2 2 0 002-2V7a2 2 0 00-2-2h-2M9 5a2 2 0 002 2h2a2 2 0 002-2M9 5a2 2 0 012-2h2a2 2 0 012 2m-6 9l2 2 4-4\"><\/path><path class=\"without-check\" stroke-linecap=\"round\" stroke-linejoin=\"round\" d=\"M9 5H7a2 2 0 00-2 2v12a2 2 0 002 2h10a2 2 0 002-2V7a2 2 0 00-2-2h-2M9 5a2 2 0 002 2h2a2 2 0 002-2M9 5a2 2 0 012-2h2a2 2 0 012 2\"><\/path><\/svg><\/span><pre class=\"shiki nord\" style=\"background-color: #2e3440ff\" tabindex=\"0\"><code><span class=\"line\"><span style=\"color: #D8DEE9\">Configuring<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">wired<\/span><span style=\"color: #D8DEE9FF\"> network<\/span><span style=\"color: #ECEFF4\">:<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">no<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">device<\/span><\/span>\n<span class=\"line\"><span style=\"color: #D8DEE9FF\">Panic<\/span><span style=\"color: #ECEFF4\">:<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">rebooting<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #81A1C1\">in<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #B48EAD\">100<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #88C0D0\">seconds<\/span><span style=\"color: #D8DEE9FF\"> (<\/span><span style=\"color: #D8DEE9\">caused<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">by<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">network<\/span><span style=\"color: #D8DEE9FF\">)<\/span><\/span><\/code><\/pre><\/div>\n\n\n\n<p>Here&#8217;s how you can fix it.<\/p>\n\n\n\n<p>Before you load the SD card, you&#8217;ll have to create a <strong>wpa_supplicant.conf<\/strong> onto the boot volume of your SD card. I found the best way is to create a <strong>New Text Document<\/strong> and rename it.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"791\" height=\"1024\" src=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-4-791x1024.jpg\" alt=\"pi zero 2 w motioneyeos\" class=\"wp-image-1631\" srcset=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-4-791x1024.jpg 791w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-4-232x300.jpg 232w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-4-768x994.jpg 768w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-4-9x12.jpg 9w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-4.jpg 799w\" sizes=\"auto, (max-width: 791px) 100vw, 791px\" \/><\/figure>\n\n\n\n<p>You&#8217;ll know you&#8217;re on the boot volume if you see files such as <strong>cmdline.txt<\/strong>, <strong>config.txt<\/strong>, <strong>bcm2710-rpi-zero-2.dtb<\/strong>.<\/p>\n\n\n\n<p>Using Notepad++, edit <strong>wpa_supplicant.conf<\/strong>.<\/p>\n\n\n\n<p>The first thing you&#8217;ll do in Notepad++ is to go to <strong>Edit -&gt; EOL Conversion -&gt; Unix LF<\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"659\" src=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-1-1-1024x659.jpg\" alt=\"pi zero 2 w motioneyeos setup\" class=\"wp-image-1629\" srcset=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-1-1-1024x659.jpg 1024w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-1-1-300x193.jpg 300w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-1-1-768x494.jpg 768w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-1-1-18x12.jpg 18w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-1-1.jpg 1077w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p>Then, paste the following text and change the parameters for <strong>country<\/strong>, <strong>ssid <\/strong>and <strong>psk <\/strong>(put in your password here). Make sure all the text you put in the ssid and psk variables are in quotes. <\/p>\n\n\n\n<p>Finally, if you are not from the US, you can find your country code <a href=\"https:\/\/en.wikipedia.org\/wiki\/ISO_3166-1_alpha-2\">here<\/a> to put in the &#8220;country&#8221; variable (e.g., DE = Germany).<\/p>\n\n\n\n<div class=\"wp-block-kevinbatdorf-code-block-pro\" data-code-block-pro-font-family=\"Code-Pro-JetBrains-Mono\" style=\"font-size:.875rem;font-family:Code-Pro-JetBrains-Mono,ui-monospace,SFMono-Regular,Menlo,Monaco,Consolas,monospace;line-height:1.25rem\"><span style=\"display:block;padding:16px 0 0 16px;margin-bottom:-1px;width:100%;text-align:left;background-color:#2e3440ff\"><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"54\" height=\"14\" viewBox=\"0 0 54 14\"><g fill=\"none\" fill-rule=\"evenodd\" transform=\"translate(1 1)\"><circle cx=\"6\" cy=\"6\" r=\"6\" fill=\"#FF5F56\" stroke=\"#E0443E\" stroke-width=\".5\"><\/circle><circle cx=\"26\" cy=\"6\" r=\"6\" fill=\"#FFBD2E\" stroke=\"#DEA123\" stroke-width=\".5\"><\/circle><circle cx=\"46\" cy=\"6\" r=\"6\" fill=\"#27C93F\" stroke=\"#1AAB29\" stroke-width=\".5\"><\/circle><\/g><\/svg><\/span><span role=\"button\" tabindex=\"0\" data-code=\"      country=US\n        update_config=1\n        ctrl_interface=\/var\/run\/wpa_supplicant\n        \n        network={\n            scan_ssid=1\n            ssid=&quot;putWiFiSSIDhere&quot;\n            psk=&quot;putPasswordHere&quot;\n        }\" style=\"color:#d8dee9ff;display:none\" aria-label=\"Copy\" class=\"code-block-pro-copy-button\"><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" style=\"width:24px;height:24px\" fill=\"none\" viewBox=\"0 0 24 24\" stroke=\"currentColor\" stroke-width=\"2\"><path class=\"with-check\" stroke-linecap=\"round\" stroke-linejoin=\"round\" d=\"M9 5H7a2 2 0 00-2 2v12a2 2 0 002 2h10a2 2 0 002-2V7a2 2 0 00-2-2h-2M9 5a2 2 0 002 2h2a2 2 0 002-2M9 5a2 2 0 012-2h2a2 2 0 012 2m-6 9l2 2 4-4\"><\/path><path class=\"without-check\" stroke-linecap=\"round\" stroke-linejoin=\"round\" d=\"M9 5H7a2 2 0 00-2 2v12a2 2 0 002 2h10a2 2 0 002-2V7a2 2 0 00-2-2h-2M9 5a2 2 0 002 2h2a2 2 0 002-2M9 5a2 2 0 012-2h2a2 2 0 012 2\"><\/path><\/svg><\/span><pre class=\"shiki nord\" style=\"background-color: #2e3440ff\" tabindex=\"0\"><code><span class=\"line\"><span style=\"color: #D8DEE9FF\">      <\/span><span style=\"color: #D8DEE9\">country<\/span><span style=\"color: #81A1C1\">=<\/span><span style=\"color: #D8DEE9\">US<\/span><\/span>\n<span class=\"line\"><span style=\"color: #D8DEE9FF\">        <\/span><span style=\"color: #D8DEE9\">update_config<\/span><span style=\"color: #81A1C1\">=<\/span><span style=\"color: #B48EAD\">1<\/span><\/span>\n<span class=\"line\"><span style=\"color: #D8DEE9FF\">        <\/span><span style=\"color: #D8DEE9\">ctrl_interface<\/span><span style=\"color: #81A1C1\">=\/var<\/span><span style=\"color: #D8DEE9FF\">\/<\/span><span style=\"color: #D8DEE9\">run<\/span><span style=\"color: #D8DEE9FF\">\/wpa_supplicant<\/span><\/span>\n<span class=\"line\"><span style=\"color: #D8DEE9FF\">        <\/span><\/span>\n<span class=\"line\"><span style=\"color: #D8DEE9FF\">        <\/span><span style=\"color: #D8DEE9\">network<\/span><span style=\"color: #81A1C1\">=<\/span><span style=\"color: #ECEFF4\">{<\/span><\/span>\n<span class=\"line\"><span style=\"color: #D8DEE9FF\">            <\/span><span style=\"color: #D8DEE9\">scan_ssid<\/span><span style=\"color: #81A1C1\">=<\/span><span style=\"color: #B48EAD\">1<\/span><\/span>\n<span class=\"line\"><span style=\"color: #D8DEE9FF\">            <\/span><span style=\"color: #D8DEE9\">ssid<\/span><span style=\"color: #81A1C1\">=<\/span><span style=\"color: #ECEFF4\">&quot;<\/span><span style=\"color: #A3BE8C\">putWiFiSSIDhere<\/span><span style=\"color: #ECEFF4\">&quot;<\/span><\/span>\n<span class=\"line\"><span style=\"color: #D8DEE9FF\">            <\/span><span style=\"color: #D8DEE9\">psk<\/span><span style=\"color: #81A1C1\">=<\/span><span style=\"color: #ECEFF4\">&quot;<\/span><span style=\"color: #A3BE8C\">putPasswordHere<\/span><span style=\"color: #ECEFF4\">&quot;<\/span><\/span>\n<span class=\"line\"><span style=\"color: #D8DEE9FF\">        <\/span><span style=\"color: #ECEFF4\">}<\/span><\/span><\/code><\/pre><\/div>\n\n\n\n<p>Save the file and put the SD card into your Raspberry Pi Zero 2.<\/p>\n\n\n\n<p>You should be able to boot motionEyeOS now, and you can get the web interface by accessing the IP address of your Raspberry Pi Zero 2 on another web browser.<\/p>\n\n\n\n<p>One of the ways you can find the IP address of your Pi Zero 2 W is on the boot screen where it says:<\/p>\n\n\n\n<div class=\"wp-block-kevinbatdorf-code-block-pro\" data-code-block-pro-font-family=\"Code-Pro-JetBrains-Mono\" style=\"font-size:.875rem;font-family:Code-Pro-JetBrains-Mono,ui-monospace,SFMono-Regular,Menlo,Monaco,Consolas,monospace;line-height:1.25rem\"><span style=\"display:block;padding:16px 0 0 16px;margin-bottom:-1px;width:100%;text-align:left;background-color:#2e3440ff\"><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"54\" height=\"14\" viewBox=\"0 0 54 14\"><g fill=\"none\" fill-rule=\"evenodd\" transform=\"translate(1 1)\"><circle cx=\"6\" cy=\"6\" r=\"6\" fill=\"#FF5F56\" stroke=\"#E0443E\" stroke-width=\".5\"><\/circle><circle cx=\"26\" cy=\"6\" r=\"6\" fill=\"#FFBD2E\" stroke=\"#DEA123\" stroke-width=\".5\"><\/circle><circle cx=\"46\" cy=\"6\" r=\"6\" fill=\"#27C93F\" stroke=\"#1AAB29\" stroke-width=\".5\"><\/circle><\/g><\/svg><\/span><span role=\"button\" tabindex=\"0\" data-code=\"Interface wlan0 has the IP address XXXXXX\" style=\"color:#d8dee9ff;display:none\" aria-label=\"Copy\" class=\"code-block-pro-copy-button\"><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" style=\"width:24px;height:24px\" fill=\"none\" viewBox=\"0 0 24 24\" stroke=\"currentColor\" stroke-width=\"2\"><path class=\"with-check\" stroke-linecap=\"round\" stroke-linejoin=\"round\" d=\"M9 5H7a2 2 0 00-2 2v12a2 2 0 002 2h10a2 2 0 002-2V7a2 2 0 00-2-2h-2M9 5a2 2 0 002 2h2a2 2 0 002-2M9 5a2 2 0 012-2h2a2 2 0 012 2m-6 9l2 2 4-4\"><\/path><path class=\"without-check\" stroke-linecap=\"round\" stroke-linejoin=\"round\" d=\"M9 5H7a2 2 0 00-2 2v12a2 2 0 002 2h10a2 2 0 002-2V7a2 2 0 00-2-2h-2M9 5a2 2 0 002 2h2a2 2 0 002-2M9 5a2 2 0 012-2h2a2 2 0 012 2\"><\/path><\/svg><\/span><pre class=\"shiki nord\" style=\"background-color: #2e3440ff\" tabindex=\"0\"><code><span class=\"line\"><span style=\"color: #D8DEE9\">Interface<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">wlan0<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">has<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">the<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">IP<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">address<\/span><span style=\"color: #D8DEE9FF\"> <\/span><span style=\"color: #D8DEE9\">XXXXXX<\/span><\/span><\/code><\/pre><\/div>\n\n\n\n<p>Login with the default username <strong>admin<\/strong> and blank for the password field.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"519\" src=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-1024x519.jpg\" alt=\"pi zero 2 w motioneyeos web interface\" class=\"wp-image-1632\" srcset=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-1024x519.jpg 1024w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-300x152.jpg 300w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-768x389.jpg 768w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-1536x778.jpg 1536w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos-18x9.jpg 18w, https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/pi-zero-2-w-motioneyeos.jpg 1917w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p>If you have connected a camera, it should load automatically.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Got a problem?<\/h2>\n\n\n\n<p>If you have a problem with your Raspberry Pi Zero 2, feel free to ask away in the comments, and I\u2019ll try to find a fix.<\/p>\n<div class=\"shariff shariff-align-center shariff-widget-align-left shariff-buttonstretch\"><ul class=\"shariff-buttons theme-white orientation-horizontal buttonsize-medium\"><li class=\"shariff-button twitter shariff-nocustomcolor\" style=\"background-color:#595959\"><a href=\"https:\/\/twitter.com\/share?url=https%3A%2F%2Fpicockpit.com%2Fraspberry-pi%2Fthe-big-raspberry-pi-zero-2-w-troubleshooting-guide%2F&text=The%20big%20Raspberry%20Pi%20Zero%202%20W%20Troubleshooting%20guide\" title=\"Share on X\" aria-label=\"Share on X\" role=\"button\" rel=\"noopener nofollow\" class=\"shariff-link\" style=\"; background-color:#000; color:#000\" target=\"_blank\"><span class=\"shariff-icon\" style=\"fill:#000\"><svg width=\"32px\" height=\"20px\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 24 24\"><path fill=\"#000\" d=\"M14.258 10.152L23.176 0h-2.113l-7.747 8.813L7.133 0H0l9.352 13.328L0 23.973h2.113l8.176-9.309 6.531 9.309h7.133zm-2.895 3.293l-.949-1.328L2.875 1.56h3.246l6.086 8.523.945 1.328 7.91 11.078h-3.246zm0 0\"\/><\/svg><\/span><span class=\"shariff-text\" style=\"color:#000\">share<\/span>&nbsp;<\/a><\/li><li class=\"shariff-button facebook shariff-nocustomcolor\" style=\"background-color:#4273c8\"><a href=\"https:\/\/www.facebook.com\/sharer\/sharer.php?u=https%3A%2F%2Fpicockpit.com%2Fraspberry-pi%2Fthe-big-raspberry-pi-zero-2-w-troubleshooting-guide%2F\" title=\"Share on Facebook\" aria-label=\"Share on Facebook\" role=\"button\" rel=\"nofollow\" class=\"shariff-link\" style=\"; background-color:#3b5998; color:#3b5998\" target=\"_blank\"><span class=\"shariff-icon\" style=\"fill:#3b5998\"><svg width=\"32px\" height=\"20px\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 18 32\"><path fill=\"#3b5998\" d=\"M17.1 0.2v4.7h-2.8q-1.5 0-2.1 0.6t-0.5 1.9v3.4h5.2l-0.7 5.3h-4.5v13.6h-5.5v-13.6h-4.5v-5.3h4.5v-3.9q0-3.3 1.9-5.2t5-1.8q2.6 0 4.1 0.2z\"\/><\/svg><\/span><span class=\"shariff-text\" style=\"color:#3b5998\">share<\/span>&nbsp;<\/a><\/li><li class=\"shariff-button telegram shariff-nocustomcolor\" style=\"background-color:#4084A6\"><a href=\"https:\/\/telegram.me\/share\/url?url=https%3A%2F%2Fpicockpit.com%2Fraspberry-pi%2Fthe-big-raspberry-pi-zero-2-w-troubleshooting-guide%2F&text=The%20big%20Raspberry%20Pi%20Zero%202%20W%20Troubleshooting%20guide\" title=\"Share on Telegram\" aria-label=\"Share on Telegram\" role=\"button\" rel=\"noopener nofollow\" class=\"shariff-link\" style=\"; background-color:#0088cc; color:#0088cc\" target=\"_blank\"><span class=\"shariff-icon\" style=\"fill:#0088cc\"><svg width=\"32px\" height=\"20px\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 32 32\"><path fill=\"#0088cc\" d=\"M30.8 6.5l-4.5 21.4c-.3 1.5-1.2 1.9-2.5 1.2L16.9 24l-3.3 3.2c-.4.4-.7.7-1.4.7l.5-7L25.5 9.2c.6-.5-.1-.8-.9-.3l-15.8 10L2 16.7c-1.5-.5-1.5-1.5.3-2.2L28.9 4.3c1.3-.5 2.3.3 1.9 2.2z\"\/><\/svg><\/span><span class=\"shariff-text\" style=\"color:#0088cc\">share<\/span>&nbsp;<\/a><\/li><li class=\"shariff-button reddit shariff-nocustomcolor\" style=\"background-color:#ff5700\"><a href=\"https:\/\/www.reddit.com\/submit?url=https%3A%2F%2Fpicockpit.com%2Fraspberry-pi%2Fthe-big-raspberry-pi-zero-2-w-troubleshooting-guide%2F\" title=\"Share on Reddit\" aria-label=\"Share on Reddit\" role=\"button\" rel=\"noopener nofollow\" class=\"shariff-link\" style=\"; background-color:#ff4500; color:#ff4500\" target=\"_blank\"><span class=\"shariff-icon\" style=\"fill:#ff4500\"><svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" viewBox=\"0 0 512 512\"><path fill=\"#ff4500\" d=\"M440.3 203.5c-15 0-28.2 6.2-37.9 15.9-35.7-24.7-83.8-40.6-137.1-42.3L293 52.3l88.2 19.8c0 21.6 17.6 39.2 39.2 39.2 22 0 39.7-18.1 39.7-39.7s-17.6-39.7-39.7-39.7c-15.4 0-28.7 9.3-35.3 22l-97.4-21.6c-4.9-1.3-9.7 2.2-11 7.1L246.3 177c-52.9 2.2-100.5 18.1-136.3 42.8-9.7-10.1-23.4-16.3-38.4-16.3-55.6 0-73.8 74.6-22.9 100.1-1.8 7.9-2.6 16.3-2.6 24.7 0 83.8 94.4 151.7 210.3 151.7 116.4 0 210.8-67.9 210.8-151.7 0-8.4-.9-17.2-3.1-25.1 49.9-25.6 31.5-99.7-23.8-99.7zM129.4 308.9c0-22 17.6-39.7 39.7-39.7 21.6 0 39.2 17.6 39.2 39.7 0 21.6-17.6 39.2-39.2 39.2-22 .1-39.7-17.6-39.7-39.2zm214.3 93.5c-36.4 36.4-139.1 36.4-175.5 0-4-3.5-4-9.7 0-13.7 3.5-3.5 9.7-3.5 13.2 0 27.8 28.5 120 29 149 0 3.5-3.5 9.7-3.5 13.2 0 4.1 4 4.1 10.2.1 13.7zm-.8-54.2c-21.6 0-39.2-17.6-39.2-39.2 0-22 17.6-39.7 39.2-39.7 22 0 39.7 17.6 39.7 39.7-.1 21.5-17.7 39.2-39.7 39.2z\"\/><\/svg><\/span><span class=\"shariff-text\" style=\"color:#ff4500\">share<\/span>&nbsp;<\/a><\/li><\/ul><\/div>","protected":false},"excerpt":{"rendered":"<p>Raspberry Pi Zero 2 showing blank or rainbow screen and no LED&nbsp; If you\u2019ve ensured that your Raspberry Pi has power but are not seeing anything on the screen and\/or you don\u2019t see the green LED, it means that there\u2019s something wrong with your SD card. It could be that it isn\u2019t inserted, it could&hellip;<\/p>\n","protected":false},"author":2,"featured_media":1431,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[164,3],"tags":[750,864,863,577,866,486,447,187,783,865,862,685,791],"class_list":["post-1427","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-raspberry-pi-zero-2","category-raspberry-pi-how-to","tag-camera","tag-chromium","tag-guide","tag-led","tag-motioneyeos","tag-project","tag-projects","tag-raspberry-pi","tag-raspberry-pi-os","tag-resolution","tag-troubleshooting","tag-zero","tag-zero-2-w"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.5 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>The big Raspberry Pi Zero 2 W Troubleshooting guide | PiCockpit<\/title>\n<meta name=\"description\" content=\"Raspberry Pi Zero 2 W common problems and how to fix them. Step by step guide to troubleshooting this Raspberry Pi.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"The big Raspberry Pi Zero 2 W Troubleshooting guide | PiCockpit\" \/>\n<meta property=\"og:description\" content=\"Raspberry Pi Zero 2 W common problems and how to fix them. Step by step guide to troubleshooting this Raspberry Pi.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/\" \/>\n<meta property=\"og:site_name\" content=\"PiCockpit\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/pi3gshop\" \/>\n<meta property=\"article:published_time\" content=\"2021-12-18T00:38:23+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2023-08-29T12:29:46+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/FEATURED-IMAGE.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1335\" \/>\n\t<meta property=\"og:image:height\" content=\"685\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"raspi berry\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@pi3g\" \/>\n<meta name=\"twitter:site\" content=\"@pi3g\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"raspi berry\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"7 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\\\/\"},\"author\":{\"name\":\"raspi berry\",\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/#\\\/schema\\\/person\\\/7af3a7a8c999bc722029ef9ca9d78eee\"},\"headline\":\"The big Raspberry Pi Zero 2 W Troubleshooting guide\",\"datePublished\":\"2021-12-18T00:38:23+00:00\",\"dateModified\":\"2023-08-29T12:29:46+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\\\/\"},\"wordCount\":1084,\"commentCount\":16,\"publisher\":{\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/wp-content\\\/uploads\\\/2021\\\/12\\\/FEATURED-IMAGE.jpg\",\"keywords\":[\"camera\",\"chromium\",\"guide\",\"LED\",\"motionEyeOS\",\"project\",\"Projects\",\"Raspberry Pi\",\"Raspberry Pi OS\",\"resolution\",\"Troubleshooting\",\"Zero\",\"Zero 2 W\"],\"articleSection\":[\"Raspberry Pi Zero 2\",\"Tutorials\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\\\/\",\"url\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\\\/\",\"name\":\"The big Raspberry Pi Zero 2 W Troubleshooting guide | PiCockpit\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/wp-content\\\/uploads\\\/2021\\\/12\\\/FEATURED-IMAGE.jpg\",\"datePublished\":\"2021-12-18T00:38:23+00:00\",\"dateModified\":\"2023-08-29T12:29:46+00:00\",\"description\":\"Raspberry Pi Zero 2 W common problems and how to fix them. Step by step guide to troubleshooting this Raspberry Pi.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\\\/#primaryimage\",\"url\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/wp-content\\\/uploads\\\/2021\\\/12\\\/FEATURED-IMAGE.jpg\",\"contentUrl\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/wp-content\\\/uploads\\\/2021\\\/12\\\/FEATURED-IMAGE.jpg\",\"width\":1335,\"height\":685,\"caption\":\"pi zero 2 troubleshooting\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Tutorials\",\"item\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/category\\\/raspberry-pi-how-to\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"The big Raspberry Pi Zero 2 W Troubleshooting guide\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/#website\",\"url\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/\",\"name\":\"PiCockpit\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/#organization\",\"name\":\"PiCockpit.com\",\"url\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/wp-content\\\/uploads\\\/2023\\\/07\\\/Screenshot-from-2023-07-24-15-01-24.png\",\"contentUrl\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/wp-content\\\/uploads\\\/2023\\\/07\\\/Screenshot-from-2023-07-24-15-01-24.png\",\"width\":1165,\"height\":283,\"caption\":\"PiCockpit.com\"},\"image\":{\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/pi3gshop\",\"https:\\\/\\\/x.com\\\/pi3g\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/#\\\/schema\\\/person\\\/7af3a7a8c999bc722029ef9ca9d78eee\",\"name\":\"raspi berry\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/c10c423ceeff34163dd54a5472d6da17d71c0e360e0cf8cdb8847006372f216b?s=96&d=blank&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/c10c423ceeff34163dd54a5472d6da17d71c0e360e0cf8cdb8847006372f216b?s=96&d=blank&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/c10c423ceeff34163dd54a5472d6da17d71c0e360e0cf8cdb8847006372f216b?s=96&d=blank&r=g\",\"caption\":\"raspi berry\"},\"description\":\"I'm here to help you with all your Raspberry Pi related questions &amp; love to share about new project ideas for the Raspberry Pi, and give quick tips. Of course I'll also help you with PiCockpit and how to make your Raspberry Pi even easier to use with this raspberry pi monitoring solution :-)\",\"sameAs\":[\"https:\\\/\\\/picockpit.com\"],\"url\":\"https:\\\/\\\/picockpit.com\\\/raspberry-pi\\\/author\\\/raspi-berry\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"The big Raspberry Pi Zero 2 W Troubleshooting guide | PiCockpit","description":"Raspberry Pi Zero 2 W common problems and how to fix them. Step by step guide to troubleshooting this Raspberry Pi.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/","og_locale":"en_US","og_type":"article","og_title":"The big Raspberry Pi Zero 2 W Troubleshooting guide | PiCockpit","og_description":"Raspberry Pi Zero 2 W common problems and how to fix them. Step by step guide to troubleshooting this Raspberry Pi.","og_url":"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/","og_site_name":"PiCockpit","article_publisher":"https:\/\/www.facebook.com\/pi3gshop","article_published_time":"2021-12-18T00:38:23+00:00","article_modified_time":"2023-08-29T12:29:46+00:00","og_image":[{"width":1335,"height":685,"url":"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/FEATURED-IMAGE.jpg","type":"image\/jpeg"}],"author":"raspi berry","twitter_card":"summary_large_image","twitter_creator":"@pi3g","twitter_site":"@pi3g","twitter_misc":{"Written by":"raspi berry","Est. reading time":"7 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/#article","isPartOf":{"@id":"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/"},"author":{"name":"raspi berry","@id":"https:\/\/picockpit.com\/raspberry-pi\/#\/schema\/person\/7af3a7a8c999bc722029ef9ca9d78eee"},"headline":"The big Raspberry Pi Zero 2 W Troubleshooting guide","datePublished":"2021-12-18T00:38:23+00:00","dateModified":"2023-08-29T12:29:46+00:00","mainEntityOfPage":{"@id":"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/"},"wordCount":1084,"commentCount":16,"publisher":{"@id":"https:\/\/picockpit.com\/raspberry-pi\/#organization"},"image":{"@id":"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/#primaryimage"},"thumbnailUrl":"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/FEATURED-IMAGE.jpg","keywords":["camera","chromium","guide","LED","motionEyeOS","project","Projects","Raspberry Pi","Raspberry Pi OS","resolution","Troubleshooting","Zero","Zero 2 W"],"articleSection":["Raspberry Pi Zero 2","Tutorials"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/","url":"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/","name":"The big Raspberry Pi Zero 2 W Troubleshooting guide | PiCockpit","isPartOf":{"@id":"https:\/\/picockpit.com\/raspberry-pi\/#website"},"primaryImageOfPage":{"@id":"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/#primaryimage"},"image":{"@id":"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/#primaryimage"},"thumbnailUrl":"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/FEATURED-IMAGE.jpg","datePublished":"2021-12-18T00:38:23+00:00","dateModified":"2023-08-29T12:29:46+00:00","description":"Raspberry Pi Zero 2 W common problems and how to fix them. Step by step guide to troubleshooting this Raspberry Pi.","breadcrumb":{"@id":"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/#primaryimage","url":"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/FEATURED-IMAGE.jpg","contentUrl":"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2021\/12\/FEATURED-IMAGE.jpg","width":1335,"height":685,"caption":"pi zero 2 troubleshooting"},{"@type":"BreadcrumbList","@id":"https:\/\/picockpit.com\/raspberry-pi\/the-big-raspberry-pi-zero-2-w-troubleshooting-guide\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/picockpit.com\/raspberry-pi\/"},{"@type":"ListItem","position":2,"name":"Tutorials","item":"https:\/\/picockpit.com\/raspberry-pi\/category\/raspberry-pi-how-to\/"},{"@type":"ListItem","position":3,"name":"The big Raspberry Pi Zero 2 W Troubleshooting guide"}]},{"@type":"WebSite","@id":"https:\/\/picockpit.com\/raspberry-pi\/#website","url":"https:\/\/picockpit.com\/raspberry-pi\/","name":"PiCockpit","description":"","publisher":{"@id":"https:\/\/picockpit.com\/raspberry-pi\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/picockpit.com\/raspberry-pi\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/picockpit.com\/raspberry-pi\/#organization","name":"PiCockpit.com","url":"https:\/\/picockpit.com\/raspberry-pi\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/picockpit.com\/raspberry-pi\/#\/schema\/logo\/image\/","url":"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2023\/07\/Screenshot-from-2023-07-24-15-01-24.png","contentUrl":"https:\/\/picockpit.com\/raspberry-pi\/wp-content\/uploads\/2023\/07\/Screenshot-from-2023-07-24-15-01-24.png","width":1165,"height":283,"caption":"PiCockpit.com"},"image":{"@id":"https:\/\/picockpit.com\/raspberry-pi\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/pi3gshop","https:\/\/x.com\/pi3g"]},{"@type":"Person","@id":"https:\/\/picockpit.com\/raspberry-pi\/#\/schema\/person\/7af3a7a8c999bc722029ef9ca9d78eee","name":"raspi berry","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/c10c423ceeff34163dd54a5472d6da17d71c0e360e0cf8cdb8847006372f216b?s=96&d=blank&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/c10c423ceeff34163dd54a5472d6da17d71c0e360e0cf8cdb8847006372f216b?s=96&d=blank&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/c10c423ceeff34163dd54a5472d6da17d71c0e360e0cf8cdb8847006372f216b?s=96&d=blank&r=g","caption":"raspi berry"},"description":"I'm here to help you with all your Raspberry Pi related questions &amp; love to share about new project ideas for the Raspberry Pi, and give quick tips. Of course I'll also help you with PiCockpit and how to make your Raspberry Pi even easier to use with this raspberry pi monitoring solution :-)","sameAs":["https:\/\/picockpit.com"],"url":"https:\/\/picockpit.com\/raspberry-pi\/author\/raspi-berry\/"}]}},"_links":{"self":[{"href":"https:\/\/picockpit.com\/raspberry-pi\/wp-json\/wp\/v2\/posts\/1427","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/picockpit.com\/raspberry-pi\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/picockpit.com\/raspberry-pi\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/picockpit.com\/raspberry-pi\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/picockpit.com\/raspberry-pi\/wp-json\/wp\/v2\/comments?post=1427"}],"version-history":[{"count":15,"href":"https:\/\/picockpit.com\/raspberry-pi\/wp-json\/wp\/v2\/posts\/1427\/revisions"}],"predecessor-version":[{"id":5018,"href":"https:\/\/picockpit.com\/raspberry-pi\/wp-json\/wp\/v2\/posts\/1427\/revisions\/5018"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/picockpit.com\/raspberry-pi\/wp-json\/wp\/v2\/media\/1431"}],"wp:attachment":[{"href":"https:\/\/picockpit.com\/raspberry-pi\/wp-json\/wp\/v2\/media?parent=1427"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/picockpit.com\/raspberry-pi\/wp-json\/wp\/v2\/categories?post=1427"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/picockpit.com\/raspberry-pi\/wp-json\/wp\/v2\/tags?post=1427"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}